Inspection And Service; Warranty Information - Aqua Lung EBIS-3000 User Manual

26

INSPECTION AND SERVICE

1. It cannot be assumed that the EBIS is in good working order on the basis that
it has received little use since it was last serviced. Remember that prolonged
or improper storage can still result in internal corrosion and/or deterioration of
o-ring seals and valve springs.
2. It is imperative that you obtain factory prescribed service for your EBIS on
an annual basis from a factory trained service technician. Factory prescribed
service consists of:
• Complete overhaul of the first and second stage regulator.
• Complete overhaul of inflation system.
• Visual inspection of the cylinder.
• Verification of current hydrostatic test date on cylinder (if applicable).
Re-test of cylinder is required every 5 years.
3. The EBIS may require factory prescribed service more frequently, depending
on the amount of use it receives and the environmental conditions it is used in.
4. DO NOT attempt to perform any disassembly or service of your EBIS.
Doing so may cause the system to dangerously malfunction. All service must
be performed by a factory trained service technician.
OBTAIN FACTORY PRESCRIBED SERVICE FOR YOUR EBIS ANNUALLY.
YOUR PERSONAL SAFETY AND THE MECHANICAL INTEGRITY OF YOUR
EBIS DEPEND ON IT.

WARRANTY INFORMATION

For detailed information on product warranties, please refer to the Terms and
Conditions Section of the Aqua Lung Military and Professional Buyer's Guide.
The Buyer's Guide can be viewed or downloaded from the Aqua Lung Military
and Professional website at www.aqualung.com/militaryandprofessional
EBIS - 3000 & 4500 User's Manual