Aqua Lung EBIS-3000 User Manual page 8

8
WARNING:
that it is assembled with a non standard cylinder rated for a different fill
pressure (See Fig. 2). Doing so may result in rupture or explosion in the
event of fire or overfilling. Instead, immediately return the unit to a factory
trained service technician and do not use under any circumstances.
WARNING:
the EBIS other than instructed. Doing so could cause a dangerous
malfunction which could result in serious injury or death.
3. Check to ensure the handwheel is closed and the system is depressurized (Fig.
3). Disconnect the inflator hose from the QD fitting (Fig. 4). Put the inflation system to
the side, it will be reassembled during the Vest Configuration section of the manual.
"OFF"
POSITION
Red Indicator
Ring Visible
Figure 3
4. Unscrew the fill port cap from the
fill port (Fig. 5).
5. Closely inspect the fill port opening
to ensure that no debris, residue or
moisture is present.
CAUTION:
indicates that water may have entered the first stage and cylinder. DO NOT
fill or attempt to use the EBIS until it has received a complete inspection
and any required service by a factory trained service technician.
DO NOT attempt to fill the EBIS if the cylinder markings indicate
DO NOT attempt to loosen or remove any components of
If moisture is found to be present inside the fill port opening, this
EBIS - 3000 & 4500 User's Manual
QD Fitting
Button
Figure 4
Figure 5