Dealer Inspection And Service - Aqua Lung Rapid Diver User Manual

DEALER INSPECTION AND SERVICE

WARNING: DO NOT attempt to perform any disassembly or service of your
Rapid Diver System. Service requiring disassembly must only be performed
by a factory-trained Aqua Lung technician. To obtain service or repair, see an
Authorized Aqua Lung Dealer or Distributor.
1. It cannot be assumed that the BC is in good working order on the basis that it
has received little use since it was last serviced. Remember that prolonged
or improper storage can still result in internal corrosion and/or deterioration
of o-ring seals and valve springs, as well as bladder seam degradation.
2. It is imperative that you obtain prescribed dealer service for your BC at least
once a year from an authorized dealer, including a general air leak inspection
and complete overhaul of the power inflator and Over Pressure Relief Valve
(OPRV). Your BC may require this service more frequently, depending on the
amount of use it receives and the environmental conditions it is used in.
3. If the BC is used for rental or training purposes in salt, chlorinated or silted fresh
water, it will require prescribed dealer service every three to six months. Use in
chlorinated water will greatly accelerate the deterioration of most components
and require more frequent service.
4. DO NOT attempt to perform any disassembly or overhaul service of your
BC. Doing so may cause the BC to dangerously malfunction and will render
the warranty null and void. All service must be performed by an Authorized
Aqua Lung Dealer or Distributor.
NOTE: See product specific manual for dealer inspection and service of equipment
not covered in this manual (regulator, gauges, cylinder).
NOTE: It is important to obtain prescribed dealer service for your BC at least once
annually, from an Authorized Aqua Lung Dealer or Distributor. Your personal safety
and the mechanical integrity of your BC depends on it.
27