Configuration Mode Settings - ICM Controls I3 1010HR Installation, Operation & Application Manual

The setup screens for Configuration Mode are as follows:
1. Temperature Scale (F or C)
Choose Fahrenheit or Celsius.
Press the or to select.
Press to advance to the next screen.
2. 1st Stage Temperature Differential (1°F to 5°F) (0.5°C to 2.5°C)
Set the number of degrees between your "setpoint" temperature and your "turn on" temperature.
Press the or to set differential value. Press
3. 2nd Stage Temperature Differential (1°F to 5°F) (0.5°C to 2.5°C)
Note: Not for 1010
Set the number of degrees between when stage 1 turns on and when stage 2 turns on.
Press the or to set differential value. Press
4. Staged Off Outputs
Select whether the outputs for heating and cooling are staged off independently or are
satisfied simultaneously.
= Outputs off simultaneously. = Outputs staged off independently.
Press the or to set. Press
12

Configuration Mode Settings

to advance to the next screen.
to advance to the next screen.
to advance to the next screen.
CONFIG
CONFIG
CONFIG
CONFIG