Display setpoints, fan, and program information
Press
or
to select.
REMOTE SENSOR 1 = REMOTE SENSOR 1 temperature will display.
REMOTE SENSOR 2 = REMOTE SENSOR 2 temperature will display.
Press
to exit.
The schedule override feature allows the user to override the program schedule for 1 to 5 hours. In addition, if selected, the
schedule can be overridden only until the next transition period.
To access the Schedule override feature, enter the
the SCHEDULE OVERRIDE screen. In the default setting, the Vacation & Schedule periods will be flashing in the upper right
corner of the LCD. In this mode, the Vacation & Schedule will be overridden until the next transition period. To switch to the 1-5
hour override, use the
The vacation timer lets you set the date and time of your RETURN from vacation. Until that date/time, the system will remain at
the VACATION heating and cooling setpoints specified in the configuration menu.
To use the EASY VACATION feature:
Press
, then press the
mode with the default return date 1 month later .
To set the vacation timer (and begin vacation setpoint mode):
1. Press
to select operating mode.
2. Press
, then press
3. Press
to enter the date and time you plan to RETURN from vacation.
4. When your finished entering the date/time, press
= Don't display setpoints and program schedule information.
= Always display setpoints and program schedule information.
Schedule Override
arrow. This mode allows the user to override the Schedule set points for 1-5 hours.
Setting the Vacation Timer
to scroll to "Vacation" then press
until VACATION appears.
screen, then use
to scroll through the menu options until you reach
again. The thermostat will automatically go into Vacation
.
SLEEP
VIEW
25