Operating Modes - ICM Controls I3 1010HR Installation, Operation & Application Manual

The possible operating modes for the thermostat are: OFF, HEAT, EM HEAT, COOL, and AUTO. Use
OFF Mode
• In this mode, the thermostat will not turn on the heating or cooling devices
Note: The indoor fan can be turned on manually in every operating mode by pressing
displays. The fan icon
Heat Mode
• In this mode, the thermostat controls the heating system. When the heat outputs, the flame icon
appears on the display for each stage of heat that is on.
Note: For heat pumps, there is a four minute delay for your compressor to restart after it has
turned off. To bypass the compressor time delay, go to OFF mode and press
EM Heat Mode
• In this mode, the compressor is bypassed and emergency heat is used.
Note: This mode is only used with one compressor heat pumps.
Cool Mode
• In this mode, the thermostat controls the cooling system. When the cooling outputs, the snowflake
icon appears on the display for each stage of cool that is on.
Note: There is a four minute delay for your compressor to restart after it has turned off. To
bypass the compressor time delay, go to OFF mode and press
Auto Mode
In this mode, the thermostat controls either the heating or cooling systems automatically,
depending on the displayed room temperature and the heat or cool setpoint..
20

Operating Modes

appears on the display when the fan operates.
until
.
.
to select.
MODE
OFF
MODE
HEAT
HEAT
MODE
HEAT
MODE
COOL
COOL
MODE
AUTO
HEAT
COOL