The setup screens for Configuration Mode are as follows:
1 . Temperature Scale (F or C)
Choose Fahrenheit or Celsius .
Press the up or down button to select .
Press the right button to advance to the next screen .
2 . Temperature Differential (1°F to 5°F) (0 .5°C to 2 .5°C)
Set the number of degrees between your "setpoint" temperature and your
"turn on" temperature .
Press the up or down button to set differential value .
Press the right button to advance to the next screen .
3 . Deadband (1°F - 9°F) (1°C - 5°C)
Set the minimum number of degrees between your heat setpoint and your
cool setpoint in Autochangeover mode .
Press the up or down button to set deadband value .
Press the right button to advance to the next screen .
Configuration Mode Settings