Thermostat Controls; Package Contents/Tools Required; Specifications - ICM Controls I3 1010HR Installation, Operation & Application Manual

Package includes: Thermostat, base, wiring labels, screws and wall anchors, 2 "AA" Alkaline batteries and Installation,
Operation and Application Guide
Tools required for installation: Drill with 3/16" bit, hammer, screwdriver
Electrical Rating: 24 VAC (18-30 VAC), 1 amp maximum per output terminal, 5 amp maximum total load
DC Power: 3.0 VDC (2 "AA"Alkaline batteries)
Temperature Control Range: 45°F to 90°F (7°C to 32°C) Accuracy: ±1°F (±0.5°C)
Anti-short Cycle: 4 minutes (bypass anti-short cycle delay by returning to OFF mode and pressing the
Backlight Operations: 15 seconds
Humidity Control: 10% to 80%
System Configurations: All may be used with heat pump, gas, oil, electric, and air conditioning
• I1010HR: 1-stage heat, 1-stage cool
• I2010HR: 2-stage heat, 1-stage cool
• I2020HR: 2-stage heat, 2-stage cool
2

Thermostat Controls

Left Arrow
(Go Back)
Menu Mode (Heat/Cool)

Package Contents/Tools Required

Specifications

MODE FAN SCHEDULE
AUTO OFF
PM
COOL
Wed
COOL
Home Fan Schedule
Up Arrow
Down Arrow
Right Arrow
(Forward)
icon).