Checking The Computer To Be Connected - Roland VersaStudio BT-12 Operating Instructions Manual

Hide thumbs Also See for VersaStudio BT-12:
Table of Contents

Advertisement

• The supplied power cord is for use with this machine only. Do not use it with other 
appliances. 
Doing so could result in fire or electric shock. 
• If the power cord is damaged and its inner wires are exposed or broken, contact your 
service representative for a replacement. Use of damaged power cords could result in 
fire or electric shock.result in fire or electric shock. 
• Be sure to locate the machine as close as possible to a wall outlet. This will allow easy 
disconnection of the power cord in the event of an emergency. 
• Be sure to push the plug of the power cord fully into the wall outlet. Partially inserted 
plugs create an unstable connection that can result in unsafe buildup of heat occur. 
 (mainly Europe, Asia, and China) 
Power Source 
220‐240V, 0.6A or more, 50/60Hz 
Please be sure to connect the power cord to a power source as above. 
 (mainly North America) 
Power Source 
100‐120V, 1A or more, 60Hz 
Please be sure to connect the power cord to a power source as above. 
Checking the Computer to be Connected 
To use this machine, computers must meet the following specifications: 
PC/AT‐compatible computer with USB or network interface 
Operating system: 
Windows 7/8.1/10 
Mac OS X 10.11 and later versions 
• For the required hard disk free space and amount of memory installed, follow the system 
requirements of each operating system. 
 
 
 
 
 
Checking the Computer and Installation Area
 
 
 
 
27

Advertisement

Table of Contents
loading

Table of Contents