Table of Contents
Advertisement
No Tray
The tray is not installed or is incorrectly installed.
Resolve the error using any of the following procedures:
•
Load the tray.
See page 73 "Loading a T‐shirt in the Tray".
•
Remove the tray.
Press the [Tray] key and remove the tray, and then reset the tray
•
Cancel printing.
See page 86 "Canceling Printing".
Garment Misfeed
The fabric or tray is incorrectly installed. Alternatively, a fabric or foreign object may be stuck
inside the machine.
Resolve the error using any of the following procedures:
•
Load the fabric or tray correctly.
See page 58 "Loading Fabrics".
•
Adjust the height of the tray.
See page 189 "Adjusting the Height of the Tray".
•
Remove the fabric or foreign object.
See page 193 "Removing a Fabric or Foreign Object by Opening the Top Cover".
Garment Size Mismatch
The tray of the specified size or type is not loaded.
Resolve the error using any of the following procedures:
•
Change the printing size.
•
Cancel printing.
See page 86 "Canceling Printing".
Cover Open
The top or right front cover is open.
Close the cover.
If these covers are closed, open and close each of them again.
Status Monitor Errors
209
Advertisement
Table of Contents
