• When disconnecting the power cord from the wall outlet, always pull the plug, not the
cord. Pulling the cord can damage the power cord. Use of damaged power cords could
result in fire or electric shock.
•
Do not handle the machine while the cartridge is being filled.
• Some ink is consumed to fill the print heads when you turn on the machine for the first
time.
1.
Plug the power cord fully into the machine.
2.
Open the power cover.
3.
Set the power cord as shown in the figure, and then close the power cover.
Plugging in the Power Cord and Turning the Power On
DSB068
DSB069
DSB070
35