Remove the foreign objects carefully.
7.
Check that there are no foreign objects, and then close the top cover.
The machine turns off and on automatically, and then it returns to the usual condition.
8.
Press the [ /Menu] key.
9.
Press the [ ] or [ /Menu] key to display [Maintenance], and then press the
[#Enter] key.
<Menu>
Maintenance
10.
Press the [ ] or [ /Menu] key to display [Nozzle Check], and then press the
[#Enter] key.
<Maintenance>
Nozzle Check
11.
Press the [Start] key.
A test pattern is printed.
Wait while "Maintenance in process..." is displayed.
12.
Press the [Escape] key.
13.
Check the printed test pattern.
Normal
When print heads are clogged
If the print head is clogged, perform Head Cleaning. See page 101 "Head‐cleaning".
CFT168
CFT169
Using the [Maintenance] Menu
113