Step 4: Installing the Upper Scan Bed
For the safety of the package delivering, the upper scan bed is packed separately
from the scanner unit. Before using it with the scanner, follow the steps below
to assemble it in the scanner:
1. Locate a handle at the front
panel of the scanner. Grab it
to pull out the drawer of the
scanner until reaching the
edge of end.
2. Locate two hollows at the
left side of the lower scan
bed.
3. Insert the stools at bottom of
the upper scan bed into the
hollows on the lower scan
bed. Make sure the upper
scan bed has been assembled
in the scanner firmly.
Hollows
ObjectScan 1600 User's Manual
15