Opening A Check; Recalling And Adding Items; Printing A Bill - Sam4s SPS-500 Operator's Manual

Table Planner Operation

Opening a Check

The register can be predefined with up to 5
"floor plans", which allow opening of tables.
-
Press the TABLE DISPLAY key
-
Select the Floor Number to show the
correct Table plan by pressing FLOOR
-
Press the Table number
-
Sell Items
-
Press the STORE CHECK#1 key – Any
Kitchen order items sold will be printed.

Recalling and Adding items

The table planner can be used to recall a check
for further item sales
-
Press the TABLE DISPLAY key
-
Select the Floor Number to show the
correct Table plan by pressing FLOOR
-
Press the Table number
Notice the Table Number, Guests and
balance are shown on the icon
-
Sell further items.
-
Press the STORE CHECK#1 key – Any
Kitchen order items sold will be printed.

Printing a Bill

The table planner can be used to recall a check
for bill printing
-
Press the TABLE DISPLAY key
-
Select the Floor Number to show the
correct Table plan by pressing FLOOR
-
Press the Table number
Notice the Table Number, Guests and
balance are shown on the icon
-
Press the PRINT CHECK key
-
Press the STORE CHECK#1 key, unless
the Print Check key has been set to
automatically store check after print.
-50- Sam4s SPS500
T O T A L 2 . 0 0
C H K # 5 / T B L # 0 / G S T #
1 C O L A
1 C O L A
T O T A L 2 . 0 0
K1PO1 ROn REG01
T O T A L 2 . 0 0
C H K # 5 / T B L # 0 / G S T #
1 C O L A
1 C O L A
T O T A L 2 . 0 0
K1PO1 ROn REG01
0 / E M P L O Y E E 1
1 . 0 0
1 . 0 0
0 / E M P L O Y E E 1
1 . 0 0
1 . 0 0