Connection - BRAND Liquid Handling Station Operator's Manual

4.2 Connection

DANGER!
Danger to life due to electrical current
Contact with live components may result in a danger to life by electrocution.
Always be sure that the housing and covers are intact and closed.
Only connect the instrument to properly grounded power outlets.
Before connecting, check that the supply voltage matches the permitted ope-
rating voltage. An incorrect supply voltage can lead to the destruction of the
instrument.
Before turning on, be sure that the power cable and connections are intact.
The instrument may only be opened by technicians authorized by the manufac-
turer to do so. Before opening or removing covers, turn off the instrument and
pull the power plug.
Keep moisture away from live components to avoid short circuits.
1. Connect the instrument to the PC through the COM interface.
2. Connect the instrument to power using the power cable included.
3. Turn the power switch on the back of the instrument on.
For the instrument to work correctly and to avoid danger to the user, it is necessary
to have the manufacturer install the instrument and perform initial start-up. All
users of the instrument must also be trained by the manufacturer or an authorized
dealer before initial start-up.
Contact the manufacturer before decommissioning, transporting or disposing of
the device.
21