BRAND Liquid Handling Station Operator's Manual page 17

7. Danger of crushing
Caution!
Crushing danger - Watch your fingers and hands!
Only reach into the work area when the machinery is at a standstill!
If the front panel is opened while a program is in progress, the running process will be
interrupted after the current work step has finished.
Wait until the machinery has stopped before reaching into the work area!
8. Visual inspection before starting work
Caution!
Inspection before starting work
Before starting work, inspect the instrument to verify that it is in proper condition.
If damage can be observed that would endanger safe operation, do not work with the
instrument, until appropriate repairs are performed.
If the instrument is contaminated with liquids or dirt, clean it up before starting work.
9. Malfunctions
Caution!
Handling malfunctions
If malfunctions occur during the work process, correct them immediately.
Follow the instructions on the screen.
If the program does not display error messages and instructions, stop the procedure by
actuating the on/off switch. When in doubt, contact the manufacturer.
An "emergency stop" can be carried out by pulling the power plug. Please note that in
this case data may be lost.
15