Table of Contents
Advertisement
Let the thermic press cool down for 30 minutes.
Remove excess glue with some abrasive paper.
Loosen the belt.
8. RESPONSABILITY
elcom
cannot be held responsible for any damages or harms due to non-authorized modification
of any parts, especially the safety parts.
Only original components can be used for maintenance or fixing.
elcom
cannot be held responsible for any malfunction if some spare parts have been used without
the validation of elcom.
elcom
reserves the right to make improvements and technical modifications without any further
notice.
9. CUSTOMER SERVICE
Do not hesitate to contact us for any question or advice. We will be glad to assist you.
Tel: + 33 (0)4 74 43 99 61
E-mail:
elcom@elcom.fr
I02-121 User manual & maintenance guide
of TLM 2000
Version 02
(translation of the original manual)
Page 26 sur 41
Advertisement
Table of Contents
Need help?
Do you have a question about the TLM 2000 and is the answer not in the manual?