Sine-Wave Filter - Siemens PM250 Hardware Installation Manual

Accessories
7.1 Reactor and filter
7.1.3

Sine-wave filter

Installing the sine-wave filter as base component
The sine-wave filters for Power Modules with a rated power (HO) up to 11 kW are designed
as base components. The sine-wave filter is attached to the mounting surface and the Power
Module is mounted directly on the sine-wave filter. The cables to the Power Module are
already connected to the sine-wave filter. The sine-wave filter is connected to the motor
through terminals.
Figure 7-6
The overall and mounting dimensions of the sine-wave filter are written in the technical
specifications.
62
Connecting the sine-wave filter as base component
Hardware Installation Manual, 09/2012, A5E01003502B AD
PM250 Power Module