Output Reactor - Siemens PM250 Hardware Installation Manual

7.1.2

Output reactor

Installing the output reactor as base component
The output reactors for Power Modules with a rated power (HO) up to 11 kW are designed
as base components. The output reactor is attached to the mounting surface and the Power
Module is mounted directly on the output reactor.
The cables to the Power Module are already connected to the output reactor. The output
reactor is connected to the motor through terminals.
Figure 7-4
The overall and mounting dimensions of the output reactor are written in the technical
specifications.
PM250 Power Module
Hardware Installation Manual, 09/2012, A5E01003502B AD
Connecting the output reactor as base component
Siemens Parts
Accessories
7.1 Reactor and filter
57