Loading New Firmware - Topcon GR-5 Operator's Manual

Loading New Firmware

Receiver board firmware is released as a compressed file that you download and decompress. This file contains the following
two files:
•
ramimage.ldr – the Receiver board RAM file
•
main.ldp – the Receiver board Flash file
To upload firmware files to the receiver:
1. Connect the receiver to a computer using the Power and Serial cable receiver accessory (p/n: 100182‐01).
2. To connect to the receiver in TRU:
a. Click DeviceApplication ModeFirmware Loader.
b. Click DeviceConnect.
c. In the Connection Parameters window (Figure 19), select Serial Port and the port name, and then click
Connect.
Loading New Firmware
P/N: 7010‐1004 45