Manual Conventions
This manual uses the following conventions:
Convention
Description
Bold
Menu, or drop-down menu selection
Name of a dialog box or screen
Button or key commands
User supplied text or variable
Mono
Italic
Reference to another manual or help document
Further information to note about system configuration, maintenance, or setup.
Supplementary information that can have an adverse affect on system operation, system
performance, data integrity, measurements, or personal safety.
Notification that an action has the potential to result in system damage, loss of data, loss of
warranty, or personal injury.
Intended Audience and Qualification
This manual is intended for system engineers, system designers, and programmers who are integrating the
B111 board to their products to achieve GNSS positioning capabilities.
It is highly recommended that installation, commissioning, use, and maintenance of the B111 board are
preformed by personnel trained in electronics.
Hardware and Firmware Versions
The information in this manual corresponds to the following hardware and firmware versions:
•
B111 board hardware revision 6.7.
•
B111EVB board hardware revision 2.3
•
GNSS firmware version 5.1p1
Additional Documentation
The following documentation can be useful while working with the B111 board:
•
Maintenance Guide
commands.
•
GRIL Reference Manual
Language (GRIL) used to communicate and control a TPS receiver, including the B111.
•
TRU Help
– explains how to install, set up, and use the TRU software on desktop computers and hand-held
controllers.
Preface
(1020733-01) – explains how to maintain the B111 for various tasks using GRIL
(27-040004-01) – contains an exhaustive description of the GNSS Receiver Interface
P/N: 1018409-01
Example
FileExit (Click the File menu and click Exit)
screen...
From the Connection
Click Finish.
Enter.
Type
, and click
guest
Refer to the Topcon Reference Manual .
vi