Newtec AZ430 User Manual page 5

Safety Regulations
SAFETY REGULATIONS
Please read this chapter before you install and use this equipment.
To ensure your safety, the equipment has been designed to comply with the
following safety standard:
Before you start to install and operate the modem, please make sure you observe
the following points:
• The equipment described in this manual is designed to be used by properly
trained personnel only. Only qualified personnel who are aware of hazards
involved may adjust, maintain and repair the equipment.
• To use the equipment correctly and safely, it is essential that both operating and
servicing personnel follow generally accepted safety procedures in addition to
the safety precautions specified in this manual. Warning and caution statements
and/or symbols are marked on the equipment when necessary. Whenever it is
likely that safety protection is impaired, immediately switch off the equipment
and secure it against unintended operation. Inform the appropriate servicing
authority about the problem. For example, safety is likely to be impaired if the
equipment fails to perform the intended measurements or shows visible
damage.
version 1.0
iv
IEC 60950 Safety of Information Technology Equipment
The AZ430 Telco Satellite Modem has no operator serviceable
parts inside. Refer servicing to qualified personnel. To prevent
electrical shock, do not remove covers.
Caution1:
FOR CONTINUED PROTECTION AGAINST FIRE, REPLACE
LINE FUSES ONLY WITH SAME TYPE AND RATING (5 X 20mm
T3.15 A/250v TYPE T or slow-blow).
Caution 2:
THERE IS RISK OF EXPLOSION IF THE BATTERY IS
REPLACED WITH AN INCORRECT TYPE. DISPOSE OF USED
BATTERIES ACCORDING TO THE INSTRUCTIONS.
SHAPING THE FUTURE OF SATELLITE COMMUNICATIONS
User Manual for AZ430 WAN Satellite Modem