Table of Contents
Advertisement
How to Manage
By default, the IP address of all Newtec devices is 10.0.0.1.
/Unit/Setup/Ethernet
Device IP address: 010.000.000.001
In this mode, click on the left side of the screen to get an overview of all the
parameters in the modem.
To change the parameters of the modem, click Log In to log into the modem.
Log in with the user name and password that is defined in the:
>> Unit >> Setup >> Web interface menu.
Once logged in, there are three levels:
You can now remotely view and change all the parameters of the modem through
the GUI.
version 1.0
13
By default the login credentials <root> are used.
• Read-only: in this mode you can only see (read) the
parameters corresponding to the operator mode. You cannot
change them.
• Operator: this mode corresponds with the modem Normal
mode. It enables the default set of parameters that are most
frequently used.
• Administrator: this mode corresponds with the device Expert
mode and gives you access to an additional set of more
advanced parameters.
SHAPING THE FUTURE OF SATELLITE COMMUNICATIONS
User Manual for AZ430 WAN Satellite Modem
Advertisement
Table of Contents
