Specifications, Requirements, and Precautions
1.4
Mechanical Specifications
The camera housing conforms to protection class IP30 assuming that the lens mount is covered by
a lens or by the protective plastic seal that is shipped with the camera.
1.4.1
Camera Dimensions and Mounting Points
The camera dimensions in millimeters are as shown in Figure 13.
Camera housings are equipped with mounting holes on the bottom as shown in the drawings.
15
2x M2; 3 deep
2x M3; 3 deep
16.5
12
17.526
Fig. 13: Mechanical Dimensions (in mm)
16
23.7 (dimension for M3)
Bottom
2x M2; 3 deep
22 (dimension for M2)
6.3
42
54
Photosensitive surface of the sensor
Top
2x M2; 4 deep
M3; 3 deep
5.77
20
15.77
6.6
29
Basler ace GigE