Mechanical Specifications; Camera Dimensions And Mounting Points - Basler GIGE VISION ace acA640-100gm/gc Manual

1.4
The camera housing conforms to protection class IP30 assuming that the lens mount is covered by
a lens or by the protective plastic seal that is shipped with the camera.
1.4.1
The camera dimensions in millimeters are as shown in Figure 6.
Camera housings are equipped with mounting holes on the bottom as shown in the drawings.
2x M2; 3 deep
2x M3; 3 deep
Fig. 6: Mechanical Dimensions (in mm)
Basler ace
Arrow.com. Arrow.com. Arrow.com. Arrow.com. Arrow.com. Arrow.com. Arrow.com. Arrow.com. Arrow.com. Arrow.com. Arrow.com. Arrow.com. Arrow.com. Arrow.com. Arrow.com. Arrow.com. Arrow.com. Arrow.com. Arrow.com. Arrow.com. Arrow.com. Arrow.com. Arrow.com.
Downloaded from Downloaded from Downloaded from Downloaded from Downloaded from Downloaded from Downloaded from Downloaded from Downloaded from Downloaded from Downloaded from Downloaded from Downloaded from Downloaded from Downloaded from Downloaded from Downloaded from Downloaded from Downloaded from Downloaded from Downloaded from Downloaded from Downloaded from

Mechanical Specifications

Camera Dimensions and Mounting Points

15
Bottom
16.5
12
42
54
17.526 Photosensitive surface of the sensor
Top
Specifications, Requirements, and Precautions
23.7 (dimension for M3)
2x M2; 4 deep
M3; 3 deep
2x M2; 3 deep
22 (dimension for M2)
6.3
5.77
20
15.77
6.6
29
9