Jackson Dynatemp Series Installation, Operation And Service Manual page 4

REVISION HISTORY
Revision Revision
Letter Date
A 07-27-16
B 10-31-16
C 2-22-17
D 7-10-18
Applicable
Made by
ECNs
JH N/A
ECN 8392
JH ECN 8411
ECN 8442
JH N/A
ECN 8392
ECN 8481
ECN 8480
ECN 8492
ECN 8522
ECN 8533
JH
ECN 8536
ECN 8599
ECN 8617
ECN 8618
QOF NDB-449
QOF NDB-470
Initial release of the manual.
Updated top-view dimensions, pg. 1.
Updated table dimensions, pg. 2.
Added Drain Quench Kit P/N to pg. 50.
Updated Outlet Steam Plumbing, pg. 39.
Updated Inlet Steam Plumbing, pg. 40.
Replaced thermostat on pg. 28 with new thermostat and bracket.
Replaced thermostat on pg. 30 with new thermostat and bracket.
Added thermostat and bracket to pg. 34.
Updated External Device Wiring diagram, pg. 57.
Added the VER Machine to the manual.
Updated the External Device Wiring page.
Added Chemical Connections section to pg. 9.
Added Motor Rotation section to pg. 10.
Revised Deliming section on pg. 17 to address rinse arms.
Added links to Steam Booster manual where appropriate.
Changed P/Ns of items 8, 10, and 13 on pg. 27.
Added door stop block to pg. 28.
Changed yoke and yoke assembly P/Ns on pg. 30.
Added thermostat and thermostat bracket to pgs. 31-32.
Added display components to pg. 36.
Updated rinse arm assembly with new bearing on pgs. 37-38.
Added new rinse tank assembly to pg. 39.
Updated P/Ns for old rinse tank and rinse tank cover on pg. 40.
Added phase conversion kit to pg. 41.
Corrected 60 Hz motor P/N on pg. 42.
Added motor only P/N for 60 Hz on pg. 42.
Updated Plumbing and VER Plumbing sections to 1/2" plumbing.
Updated NB Plumbing section.
Added top vent bracket and fan wiring harness to pg. 52.
Updated schematics on pgs. 53-55.
Added I/O Module schematic to pg. 56.
Moved External Device Wiring section from addendum to hyperlink.
Details
i