Jackson Dynatemp Series Installation, Operation And Service Manual page 16

INSTALLATION
CHEMICAL
CONNECTIONS
Chemical connections
should be made by the
chemical supplier.
Using deionized water or
other aggressive fluids
will result in corrosion and
failure of components and
will void the warranty.
!
WARNING
WARNING! Some of the
chemicals used in
dishwashing may cause
chemical burns if they
come in contact with skin.
Wear protective gear when
handling these chemicals.
If any skin comes in
contact with these
chemicals, immediately
follow the instructions
provided with the
chemicals for treatment.

07610-004-29-29-D
Connect detergent by removing the bulkhead fitting on the side of the machine and
replacing it with the appropriate dispensing equipment.
Connect rinse-aid by removing one of the brass plugs on the side of the rinse
injector and replacing it with the appropriate dispensing equipment.
The electrical connections for chemical dispensers are made on a fuse block inside
the control box. Click here
Detergent
Rinse-aid
Dispenser Electrical Connections
for a depiction of the fuse block and connection locations.
INSTRUCTIONS
9