Missed Call Log - UTStarcom FSU811 User Manual

2-6 Basic Operations
As shown in the Figure 01/17, the upper right corner display indicates the last
dialed number and that the phone has stored 17 dialed numbers.
If there is no dialed numbers, "No Record" will be displayed.
In standby status, you can also view the Dialed Call Log by pressing UP key.
4. Press UP and DOWN key to browse the dialed numbers.
If the number has been stored in the Phonebook, the name stored in the
Phonebook will be displayed.
Press TALK key to dial the number being displayed.
Press DEL key to delete this dialed number record. The message "Delete?"
will be displayed. Press MENU/OK key to confirm the deletion.
2.8

Missed Call Log

The phone can store the last 60 missed call numbers (Each number has a max
digits of 24). You can directly search for the missed incoming calls and dial them.
The searching result will be begin to display from the last unanswered incoming
call.
1. In standby status, press MENU/OK key.
The main menu is displayed.
2. Press 1 key to enter the Call Log menu.
3. Press 1 key to select Missed Call Log, the info about the last missed call will
be displayed.
M i ssed Log
11/ 05 16 ： 50
COMPANY
12345678
As shown in the Fig, 01/09 at the upper right corner means that this missed
call is the last one and the phone has altogether 9 missed calls.
If there are no missed calls, "No Record" will be displayed.
In standby mode, you can also view the missed calls by pressing LEFT key.
4. Press UP and DOWN key to browse the Missed Call Log.
If the number has been stored in the Phonebook, the recorded name will be
displayed. If the incoming call number was not available, then the "CID can
not display" message will be displayed.
Press TALK key to dial the number being displayed.
Press DEL key to delete this unanswered incoming call.
Note:
－－－
01/ 17
Back
FSU811 User Guide