UTStarcom FSU811 User Manual page 34

4-6 The Additional Functions
If the alarm has been set to "On", the "
4.9.2 Set Alarm Time
1. Press MENU/OK→4→2 to display the alarm settings menu.
2. Press 2 to select "Time"; the time entry menu is displayed.
You can also press UP/DOWN to select "Time", and then press MENU/OK
to display the time entry menu.
3. Enter the alarm time.
Enter the alarm time in 24-hour format.
The selected number will flash. Press LEFT/RIGHT to move the cursor to
modify the alarm time.
4. Press MENU/OK to confirm. If the operation is successful, "Finished" will be
displayed; otherwise, prompt of failed will be displayed.
4.9.3 Set Alarm Period
1. Press MENU/OK→4→2 to enter the alarm settings menu.
2. Press 3 to select "Period" and display the cycle selection menu.
Press UP/DOWN to select "Period", and then press MENU/OK to display
the period selection menu.
3. Press UP/DOWN to select the alarm cycle..
The alarm periods that are available are: Once, Every Day, and Mon - Fri.
The default alarm cycle is Once.
4. Press MENU/OK to confirm. If the operation is successful, "Finished" will be
displayed otherwise, prompt of failed will be displayed.
" icon will be displayed.
FSU811 User Guide