Time Setting; Language Selection; Contrast Settings - UTStarcom FSU811 User Manual

FSU811 User Guide
4.4

Time setting

After setting the time/date, they will be displayed in standby mode. Please
enter the time correctly. Other functions (such as the alarms) refer to the time
and will only function properly when it has been set.
The phone's default time/date setting is Jan 1, 2003 00:00.
The date setting options range from Jan 1, 2000 to Dec 31, 2049.
1. Press MENU/OK→3→3, to display the date and time entry menu.
2. Press keys 0~9 to enter date and time.
The selected digit will flash. Press LEFT/RIGHT to select the location in need
of modification, then press the number keys to overwrite
If you are attempting to enter an invalid date or time, the keys will not
respond.
I nput :
O K
3. After the entry, press MENU/OK to save the settings. If the setting is
successful, "Finished" will be displayed; otherwise, prompt of failed will be
displayed.
4.5

Language Selection

The phone has two language options: English and Simplified Chinese.
The default setting for language is "English".
1. Press MENU/OK→3→4, and enter the language selecting screen.
The cursor identifies the language option that is currently in use.
2. Press UP/DOWN to select "English" or "Simplified Chinese".
3. Press MENU/OK to confirm. If the setting is successful, "Finished" will be
displayed; otherwise, prompt of failed will be displayed. If "English" is
selected, then all the menus in subsequent operations will be in English.
4.6

Contrast settings

The phone has 20 contrast levels. The factory setting is 4.
1. Press MENU/OK→3→5, to display the contrast setting menu.
The bar display shows the current contrast level .
2. Press Up /Down/ Left /Right to adjust the contrast.
Back
The Additional Functions 4-3