Basic Operations; Dialing - UTStarcom FSU811 User Manual

Basic Operations

2. Basic Operations
Menu options that correspond to a number, may be accessed by pressing the
appropriate number key. You can also select an option by pressing the UP or
DOWN keys to select the desired option→press the MENU/OK key. This
guide primarily refers to the key-entry, selection method.
All menu options may be browsed cyclically using the cursor keys. When the
last menu option is selected, press the DOWN key to return to the first menu
option. When the first menu option is selected, press the UP key to select the
last menu option .
When setting the phone, if the operation is successful, normally an
"Accomplished" message will be displayed. If the operation fails, then
"Operation Failed" will be displayed.
For most operations, pressing the ESC key will return to the last menu display;
press the DIR key to return to standby.
2.1

Dialing

2.1.1 Pick Up and Dial
Before dialing, make sure that signal strength is sufficient. The signal strength
indicator on the LCD should register more than one bar.
1. Pick up the receiver (off-the-hook) or press the SPEAKER key; the following
off-the-hook screen will be displayed.
2003- 11- 05
Pl ease Di al
2. Enter the desired number, then press the TALK key or wait a moment; the
phone will begin to dial.
The number entered should not be longer than 24 digits. When the number is
longer than 16 digits, only the last 16 digits will be displayed.
12: 23: 03
00: 00
2