Provide Power To The Phone - UTStarcom FSU811 User Manual

FSU811 User Guide
To decrease the phone height, press "PRESS" in the center of the stand. And
at the same time press downward on the side with black rubber foot. The
angle between the stand and the base of the phone can be reduced.
3. Adjust the two stands to identical angles. Turn the phone right side up.
： ： ： ：
Note
Avoid overexerting when regulating the height of phone to prevent the phone from being
damaged.
There is a hole in both right and left sides of the base of the phone. The phone can be wall-
mounted by placing screws through these two holes.
1.4

Provide Power to the Phone

When using this phone, make sure that the power adaptor is properly connected
and the battery is correctly installed (normally, the power adaptor provides power
to the phone. In case of power failure, the battery will do so).
1.4.1 Power Adaptor Connection
When the phone is working, make sure that the power adaptor is properly
connected.
1. Insert the power adaptor into a 110 or 220V AC outlet (power adapter uses a
three-phase connector).
Ground the power socket otherwise phone use will be effected.
2. Insert the power adaptor connector into the phone adaptor jack.
A C
P o w e r
Getting Started 1-5