UTStarcom FSU811 User Manual page 2

The following symbols indicate explanations of what is to be observed.
This equipment has been tested and found to comply with the limits for a Class B digital device pursuant to
Part 15 of the FCC Rules.
Handling the Phone and AC Adapter
Use only the battery and AC adapter designated for the phone. Otherwise, it may
cause battery leakage, overheating, explosion or even fire.
Do not store in places with high humidity, high temperature or much dust, to avoid
malfunction.
The phone, battery and the AC adapter are not waterproof, so they should be kept
from wetting by rain or etc.
Do not apply strong impact or vibration, and do not throw. Such actions could
result in battery leakage, overheating, cracking or fire.
Do not place the phone or AC adapter inside a microwave oven or high-voltage
appliances. Otherwise, it may result in battery leakage, overheating or cracking as
well as phone or AC adapter overheating, smoke, fire or circuit damage.
Do not use in places with volatile gases, which may result in fire, malfunction or
damage.
Do not disassemble or modify the phone or AC adapter. Otherwise, it may cause
personal injury or malfunction
The antennas used for this transmitter must be installed to provide a separation
distance of at least 20cm from all persons and must not be co-located with or
operated in conjunction with any other antenna or transmitter.
This symbol indicates a prohibited action.
This symbol indicates an action that must always be performed.
This symbol indicates that disassembly is prohibited.
This symbol indicates that the plug of the power cord must be removed form
the outlet.
.