Smart Focus - HIKVISION TurboHD User Manual

3.4 SET UP

3.4.1 SMART FOCUS

Automatically adjusts the camera focus according to the
scene.
You are allowed to set the value manually by clicking
FOCUS+, FOCUS-, ZOOM+, ZOOM-.The value ranges
from 0 to 99. The higher the value, the clearer the
image is.
3.4.2 SCENE
You can select INDOOR, OUTDOOR, INDOOR 1, and
LOW LIGHT as the working environment.
INDOOR: Applicable to the indoor environment whose
color temperature changes are relatively slight.
OUTDOOR: Applicable to the outdoor environment
whose color temperature changes are relatively
obvious.
INDOOR1: Applicable to the indoor environment with
the strong light. Under this circumstance, WDR is ON by
default.
LOW LIGHT: Applicable to the environment with the
low light. Under this circumstance, the slow shutter is
ON by default to receive more light.
3.4.3 LENS
The camera is equipped with 2.8 to 12 mm motorized
vari-focal lens.
3.4.4 EXPOSURE
Exposure describes the brightness-related parameters.
You can adjust the image brightness by the SHUTTER,
AGC, SENS-UP, BRIGHTNESS, and D-WDR in different
light conditions.
SHUTTER: Shutter denotes the speed of the shutter.
AUTO, 1/25 s, 1/50 s, FLK, 1/200 s, 1/400 s, 1/1k s, 1/2k
s, 1/5k s, 1/10k s, 1/50k s, ×2, ×4, ×6, ×8, ×10, and ×15
are selectable.
Note:
If you select shutter as AUTO or 1/25, the SENS-UP is
adjustable (OFF/AUTO), and the SENS-UP is disabled if
any other shutter speed is selected.
EXPOSURE
1. SHUTTER
2. AGC
3. SENS-UP
4. BRIGHTNESS
5. D-WDR
6. RETURN
Figure 3. 3 Exposure
AUTO
OFF
---
---|------ 40
OFF
RET