HIKVISION TurboHD User Manual page 13

position and size of the area. Set the SENSITIVITY from
0 to 60. Set the MOTION VIEW as ON or OFF.
PRIVACY: The privacy mask allows you to cover certain
areas which you don't want to be viewed or recorded.
Up to 8 privacy areas are configurable.
Select a PRIVACY area. Set the DISPLAY status as INV,
MOSAIC, COLOR, or OFF. Click up/down/left/down
button to define the position and size of the area.
DEFECT: Defective pixels are pixels in a CCD or CMOS
image sensor in digital cameras, in which the defective
pixels fail to sense light levels correctly. This series of
camera supports defective pixel correction. Move the
cursor to DEFECT and click Iris+ to enter the defective
pixel correction interface.
LIVE DPC, and STATIC DPC are adjustable in this section.
LIVE DPC: Detects and corrects the dynamic or the
real-time defective pixels occur during the using. ON,
OFF and AUTO are selectable. The correction level from
0 to 255 is configurable if the LIVE DPC is set as ON, set
it as OFF to disable the live defective pixel correction,
and set it AUTO to detect and repair the defective pixels
automatically.
STATIC DPC: Detects and corrects the static or the fixed
defective pixels occurring during the using. ON and OFF
are selectable.
Set the STATIC DPC as ON, and click Iris+ to enter the
STATIC DPC edit interface. Move the cursor to START,
and click Iris+ to start correcting the defective pixels.
Click Iris + when you see the message of CLOSE THE IRIS
THEN PRESS SETKEY showing up on the screen.
MOTION
1. SELECT
2. DISPLAY
3. SENSITIVITY
4. MOTION VIEW ON
5. DEFAULT
6. RETURN
Figure 3. 8
PRIVACY
1. SELECT
2. DISPLAY
3. COLOR
4. TRANS.
5. DEFAULT
6. RETURN
Figure 3. 9 Privacy
DEFECT
1. LIVE DPC
2. STATIC DPC
3. RETURN
Figure 3. 10 Defect
AREA 1
ON
----|---- 30

RET
Motion
AREA 1

MOSAIC
10
1

RET

ON

ON
RET