HIKVISION TurboHD User Manual page 3

Safety Instruction
These instructions are intended to ensure that user can
use the product correctly to avoid danger or property
loss.
The precaution measure is divided into "Warnings" and
"Cautions"
Warnings: Serious injury or death may occur if any of
the warnings are neglected.
Cautions: Injury or equipment damage may occur if any
of the cautions are neglected.
Warnings Follow
these safeguards to
prevent serious injury
or death.
Warnings
In the use of the product, you must be in strict

compliance with the electrical safety regulations of
the nation and region.
Please refer to technical specifications for detailed

information.
Input voltage should meet both the SELV (Safety Extra

Low Voltage) and the Limited Power Source with AC
24V or DC 12V according to the IEC60950-1 standard.
Please refer to technical specifications for detailed
information.
Do not connect several devices to one power adapter

as adapter overload may cause over-heating or a fire
hazard.
Please make sure that the plug is firmly connected to

the power socket.
When the product is mounted on wall or ceiling, the

device shall be firmly fixed.
If smoke, odor or noise rise from the device, turn off

the power at once and unplug the power cable, and
then please contact the service center.
If the product does not work properly, please contact

your dealer or the nearest service center. Never
attempt to disassemble the camera yourself. (We
shall not assume any responsibility for problems
caused by unauthorized repair or maintenance.)
Cautions
Make sure the power supply voltage is correct before

using the camera.
Do not drop the camera or subject it to physical

shock.
Do not touch senor modules with fingers. If cleaning

is necessary, use clean cloth with a bit of ethanol and
wipe it gently. If the camera will not be used for an
Cautions Follow these
precautions to prevent
potential injury or
material damage.