HIKVISION TurboHD User Manual page 14

3.4.9 ADJUST
In the Adjust sub-menu, you can configure the settings,
including the sharpness, the image quality on monitor,
and the LSC (lens shading compensation). Move the
cursor to ADJUST and click Iris + to enter the adjust
configuration interface.
SHARPNESS: Sharpness determines the amount of
detail an imaging system can reproduce. And you can
adjust the sharpness from 0 to 15. The higher the value,
the clearer and sharper the image appears.
MONITOR: Monitor CRT, and Monitor LCD are
selectable.
CRT: The cathode ray tube is a fluorescent screen used
to view images. You can define the black level from -30
to 30, the blue gain from 0 to 100, and the red gain
from 0 to 100.
LCD: If liquid-crystal display (LCD) is selected. You can
define the gamma, blue gain from 0 to 100, and red
gain from 0 to 100.
Note:
Gamma is the name of a nonlinear operation used to
code and decode luminance or tristimulus values in
video or still image system.
LSC: Lens shading correction corrects the phenomenon
that the image gets darkened or blurred on the
periphery.
Set it as ON, move the cursor to SCAN and click Iris+ to
correct the lens shading. Set it as OFF to disable the
LSC.
3.4.10
Reset all the settings to the factory default.
3.4.11
Move the cursor to EXIT and click Iris+ to exit the menu.
1. SHARPNESS
2. MONITOR
3. LSC
4. RETURN
Figure 3. 11 Adjust
RESET
EXIT
ADJUST
--------|15
LCD
OF F
RET