Page 1
Connect to power using the charging cable and charge the battery. Green light when fully charged Charging connector Charging Requirements: With standard USB power supply: Min 5.0V/1A - Max 5.5V/3A. Note: Do not charge Socket Mobile data readers in temperatures above 100°F/40°C, as the reader may not charge properly.
Page 2
4. Ready to Read (Tests if your Application is receiving the data). You are ready to scan a barcode or NFC tag - use the barcode below to test. (The barcode when scanned will say - “Thank you for purchasing a Socket Mobile product!”)
Page 3
• To test an NFC tag or Mobile Wallet, follow instructions on the Test Cards included. Developing an Application? If you would like to integrate Socket Mobile CaptureSDK and S370 support into your own application, please visit https://sckt.tech/s370_capturesdk create a developer account, where you will find all required information and documentation.
Page 4
Socket Mobile Incorporated warrants this product against defects in material and workmanship, under normal use and service, for one (1) year from the date of purchase. Products must be purchased new from a Socket Mobile authorized distributor, reseller or from the SocketStore on Socket Mobile’s website: socketmobile.com. Used products and products purchased through non-authorized channels are not eligible for this warranty support.
Need help?
Do you have a question about the SocketScan S370 and is the answer not in the manual?
Questions and answers