SCANNING BARCODES
After connecting the SocketScan to your device, open an application.
Place the cursor where you want to enter the scanned data.
1. Hold the SocketScan a few inches from the barcode.
2. Aim, press and hold the trigger button.
By default, the SocketScan will beep, vibrate, and the side LED will
flash green to confirm successful scan.
SocketScan S800
SocketScan S840
SocketScan S860
~4" to 8"
~6" to 12"
~2" to 30"
scanning distance
scanning distance
scanning distance
7