Table of Contents
Advertisement
Page 5-12
RGC Signal
Interface Unit
(Part of RGC Gyrocompass delivery)
The RGC Signal Interface Unit is designed to generate heading signals of different
formats when connected to either RGC50, RGC10 or RGC11. The heading signal
used by AP45 is the sine/cosine output, and the interconnection is shown in Fig.
5-14.
The unit comprises one PCB mounted in a J45A/J45S type box.
Further details, such as installation, technical specifications and eventual
adjustments are described in the "RGC Interface" addendum in the RGC
Gyrocompass manual.
AP45/RGC Signal Interface Unit - Wiring
Select "1:1 SYNCHRO" via the "INSTALLATION LOOP".
Fig. 5-13
G45 Input/output
Fig. 5-14
Note!
Simrad Robertson AS
Egersund - Norway
Robertson AP45 Autopilot
Installation
Advertisement
Table of Contents
