Ac Configuration Setting - Delta RPI-H3 Operation And Installation Manual

Turn PV inverter on/off

7.2.2 AC Configuration Setting

1. Turn on DC power and wait for the LCD display is ready, then press "SEL" button
until "Country XXX" is displayed.
2. Press and hold both "SEL" and "ENT" buttons for 10 seconds until "Language
XXXXXX" is shown.
3. Press "SEL" until "AC Configurat. XXXXXX" is shown.
4. Press "ENT" to enter AC Configuration Setting page, press "SEL" to flip between two
types of configuration. As your type of configurations is displayed, press "ENT" to
confirm the setting.
System
Information
Inverter xxxxxx
xxxxxx 5.0kVA
SEL
DSP Comm. Red.
0000 0000
SEL
Event List
Enter
SEL
Inverter
ID : XX
SEL
Country
XXX
SEL
Language
XXX
SEL
Insulation Mode
XXX
Figure 7-2 :
0000
ENT
Event List Start
SEL + ENT
> 3 sec.
RS485 ID Setting
SEL + ENT
Install Settings
> 10 sec.
AC Configuration Setting-1
36
Start
Start