Table of Contents
Advertisement
TempoLink Smart Assistant
Operation Manual
2. Safety instructions
2.1 Intended use
This product may be used only for the applications defined
under item 1 and item 2 and only in conjunction with the
third-party devices and components recommended or
approved by MTS Sensors. As a prerequisite of proper
and safe operation, the product requires correct transport,
storage, mounting and commissioning and must be operated
with utmost care.
1. The sensor systems of all Temposonics
intended exclu sively for measurement tasks encountered
in industrial, commercial and laboratory applications. The
sensors are considered as system accessories and must
be connected to suitable evaluation electron ics, e.g. a
PLC, IPC, indicator or other electronic control unit.
2. TempoLink smart assistant is an accessory for
Temposonics R-Series V sensors for reading out and
adjusting of sensor parameters as well as monitoring
status values.
2.2 Foreseeable misuse
Foreseeable misuse
Wrong sensor connection
Power supply is out of the defined
range
Cables are damaged
Wrong connection
of ground / shield
series are
®
Consequence
The sensor and TempoLink smart
assistant will not work
properly or can be damaged
The TempoLink smart assistant
can be damaged
Short circuit – the sensor and
TempoLink smart assistant can
be destroyed / sensor does not
respond
Signal output is disturbed
The electronics can be damaged
Do not alter the sensor assistant.
The sensor assistant might be damaged.
Do not step on the sensor assistant.
The sensor assistant might be damaged.
I
4
I
Advertisement
Table of Contents
Need help?
Do you have a question about the TempoLink Smart Assistant and is the answer not in the manual?
Questions and answers