MUTOH ValueJet VJ-HCIPADPT-UV6 Operation Manual page 20

High-Capacity Ink Pack Adapter OPERATION MANUAL
(3) How to replace

Do not replace the Adapter's plug in a place with direct sunlight or strong light.
Ink may cure by ultraviolet light and it may cause printer damage.
Follow the procedure below to replace Adapter's plug.
1. Wear plastic gloves, rubber gloves, goggles and protective clothing.
Refer to the Operation Manual of the printer for how to wear.
2. Make sure that the printer is turned ON.
3. Remove High-capacity ink pack adapter to be replaced from the printer.
4. Wipe off excess ink on the high-capacity ink pack adapter.
3.2 Refer to "Removing High-Capacity Ink Pack Adapter from Printer."
 During replacement, be careful so that no dirt gets adhered to the inlet of the high-capacity ink pack adapter.
 If dirt gets adhered, use the paper towel supplied with the printer to wipe it off.
5. Remove the light-shielding cover from the ink bag.
6. Lower the lock lever on the high-capacity pack adapter and detach the ink bag.
No.
1 High-capacity ink pack adapter
2 Lock lever
3 Ink bag
Part Name
20