5. Tilt the high-capacity ink pack adapter as shown in the figure below to absorb ink using the
cleaning stick supplied with the printer (or commercially available tissue with sharp-edged).
・ Tilt the high-capacity ink pack adapter so that the inlet to be pointed downward a little.
・ Tilt the high-capacity ink pack adapter with the caution label side down.
・ Absorb the ink remained around the tube connector.
6. Install the high-capacity ink pack adapter to the printer.
To install high-capacity ink pack adapters to the printer, refer to the Operation Manual of the printer.
Once the adapter is installed to the printer, always use it in the same ink slot.
If not, it may cause ink leakage or ink mixture.
No.
1
Tube connector
2
Cleaning stick
3
Caution label
High-Capacity Ink Pack Adapter OPERATION MANUAL
Part Name
17