16. Wipe off the ink adhering around the inlet of the sealing jig using the paper towel supplied with the
printer (or commercially available tissue).
After using the sealing jig, always keep it in the aluminum foil bag.
If not, ink around the jig may get dry and the jig may not be usable again.
The sealing jig is required when replacing an adapter's plug. Keep it for the next use.
17. Install the ink bag to the high-capacity ink pack adapter.
3.1 Installing Ink Bags
18. Install the high-capacity ink pack adapter to the printer.
・ Replacing adapter's plug is complete.
No.
1
Inlet
2
Paper towel
High-Capacity Ink Pack Adapter OPERATION MANUAL
Part Name
27