Table of Contents
Advertisement
Global Traffic
Forwarding
Remote Subnet
Remote Subnet Mask
PPTP Advanced Settings
Item
Local IP Address
Peer IP Address
Enable NAT
Enable MPPE
Address/Control
Compression
Protocol Field Compression
Asyncmap Value
MRU
MTU
Link Detection Interval (s)
Max Retries
Expert Options
"MS-CHAPv2".
All of the data traffic will be sent out via PPTP tunnel once enable
this function.
Set the peer subnet of PPTP.
Set the netmask of peer PPTP server.
Table 4-2-8-7 PPTP Parameters
Figure 4-2-8-8
Description
Set IP address of PPTP client.
Enter tunnel IP address of PPTP server.
Enable the NAT faction of PPTP.
Enable MPPE encryption.
For PPP initialization. User can keep the default option.
For PPP initialization. User can keep the default option.
One of the PPP protocol initialization strings. User can keep
the default value. Range: 0-ffffffff.
Enter the maximum receive unit. Range: 0-1500.
Enter the maximum transmission unit. Range: 0-1500.
Set the link detection interval time to ensure tunnel
connection. Range: 0-600.
Set the maximum times of retrying to detect the PPTP
connection failure. Range: 0-10.
User can enter some other PPP initialization strings in this
field and separate the strings with blank space.
Table 4-2-8-8 PPTP Parameters
UR51 User Guide
67
Advertisement
Table of Contents
