Table of Contents
Advertisement
Priority
Set the OSPF priority of interface. Range: 0-255.
Set the authentication mode that will be used by the OSPF area.
Simple: a simple authentication password should be configured and
Authentication
confirmed again.
MD5: MD5 key & password should be configured and confirmed again.
Key ID
It only takes effect when MD5 is selected. Range 1-255.
Key
The authentication key for OSPF packet interaction.
Item
Description
Passive Interface
Passive Interface
Select interface from "cellular0", "FE".
Network
IP Address
The IP address of local network.
Netmask
The netmask of local network.
Area ID
The area ID of original LSA's router.
Area
Area ID
Set the ID of the OSPF area (IP address).
Select from "Stub" and "NSSA".
Area
The backbone area (area ID 0.0.0.0) cannot be set as "Stub" or
"NSSA".
No Summary
Forbid route summarization.
Authentication
Select authentication from "simple" and "md5".
Table 4-2-7-5 OSPF Parameters
Figure 4-2-7-6
Table 4-2--7-6 OSPF Parameters
UR51 User Guide
55
Advertisement
Table of Contents
