Table of Contents
Advertisement
3.
Go to "Network > Link Failover > Track" and configure link track parameters. You can use the default
Track settings.
4.
Go to "Network > Link Failover > VRRP" and configure VRRP parameters as below.
Router B Configuration
Go to "Network > Interface > cellular" and configure cellular connection as per
1.
application example.
2.
Go to "Network > Link Failover > SLA" and configure SLA probe. The default probe type is ICMP. The
destination address is the host address which can be probed by ICMP in public network or private
network. Other parameters can be kept as default value.
3.
Go to "Network > Link Failover > Track" and configure link track parameters. You can use the default
UR51 User Guide
cellular connection
130
Advertisement
Table of Contents
