Table of Contents
Advertisement
General Settings
Item
Enable
Network Type
APN
Username
Password
Access Number
PIN Code
Authentication
Type
Roaming
SMS Center
Enable NAT
ICMP Server
Secondary ICMP
Server
PING Times
Packet Loss Rate
Figure 4-2-1-7
Description
Check the option to enable the corresponding
SIM card.
Select from "Auto", "4G First", "4G Only", "3G
First", "3G Only", "2G Frist", and "2G Only".
Auto: connect to the network with the
strongest signal automatically.
4G First: 4G network takes precedence.
4G Only: connect to 4G network only.
And so on.
Enter the Access Point Name for cellular dial-up
connection provided by local ISP.
Enter the username for cellular dial-up
connection provided by local ISP.
Enter the password for cellular dial-up
connection provided by local ISP.
Enter the dial-up center NO. For cellular dial-up
connection provided by local ISP.
Enter a 4-8 characters PIN code to unlock the
SIM.
Select from "Auto", "PAP", "CHAP",
"MS-CHAP", and "MS-CHAPv2".
Enable or disable roaming.
Enter the local SMS center number for storing,
forwarding, converting and delivering SMS
message.
Enable or disable NAT function.
Set the ICMP detection server's IP address.
Set the secondary ICMP detection server's IP
address.
Set PING packet numbers in each ICMP
detection.
Set packet loss rate in each ICMP detection.
ICMP detection fails when the preset packet
loss rate is exceeded.
Table 4-2-1-5 Cellular Parameters
UR51 User Guide
Default
Enable
Auto
Null
Null
Null
Null
Null
Auto
Disable
Null
Enable
8.8.8.8
114.114.114.114
5
20
34
Advertisement
Table of Contents
