Table of Contents
Advertisement
SPF Delay Time
SPF Initial-holdtime
SPF Max-holdtime
Reference Bandwidth
Item
Description
Interface
Interface
Select interface from "cellular0" and "FE".
Send interval of Hello packet. If the Hello time between two adjacent
Hello Interval (s)
routers is different, the neighbour relationship cannot be established.
Range: 1-65535.
Dead Time. If no Hello packet is received from the neighbours within
the dead time, then the neighbour is considered failed. If dead times of
Dead Interval (s)
two adjacent routers are different, the neighbour relationship cannot
be established.
When the router notifies an LSA to its neighbour, it is required to make
Retransmit
acknowledgement. If no acknowledgement packet is received within
Interval (s)
the retransmission interval, this LSA will be retransmitted to the
neighbour. Range: 3-65535.
It will take time to transmit OSPF packets on the link. So a certain delay
time should be increased before transmission the aging time of LSA.
Transmit Delay
This configuration needs to be further considered on the low-speed
(s)
link.
Range: 1-65535
Interface Advanced Options
Interface
Select interface.
Network
Select OSPF network type.
Cost
Set the cost of running OSPF on an interface. Range: 1-65535.
LSA: a basic communication means of the OSPF routing
protocol for the Internet Protocol (IP).
Set the delay time for OSPF SPF calculations.
Range: 0-6000000, in milliseconds.
Set the initialization time of OSPF SPF.
Range: 0-6000000, in milliseconds.
Set the maximum time of OSPF SPF.
Range: 0-6000000, in milliseconds.
Range: 1-4294967, in Mbit.
Table 4-2-7-4 OSPF Parameters
Figure 4-2-7-5
UR51 User Guide
54
Advertisement
Table of Contents
